5.1.7.1.3. Non Funtional Requirements
The system should allow the pins to react to changes between high and low in no more than 10 microseconds. |
The system should respond in 1 microsecond when setting a pin. |
The system should allow input pins for reading signals to check inputs at least 10000 times per second. |
The system should make the pins consume less than 1 microampere when in low power mode. |
The pins should not exceed 1 milliampere of power when in use. |
The pins should be able to switch on and off at least 10 million times. |
The pins should work well at temperatures between -40°C to +85°C. |
The GPIO pins should be able to handle signals of up to 5V. |
The GPIO pins must go into low-power mode when not in use. |